![]() |
Nivek Agencies Chembur, Mumbai, Maharashtra |
Approx. Rs 1.75 Lakh / Number Get Latest Price
Automatic Grade | Semi-Automatic |
Max Cutting Thickness | 10 mm |
Max Cutting Length | 0-500 mm |
Max Cutting Width | 0-500 mm |
Max Cutting Speed | 0-500 mm/min |
Approx. Rs 15 Lakh / Unit Get Latest Price
Minimum Order Quantity | 1 Unit |
Max Cutting Thickness | 30 mm |
Max Cutting Speed | 2000-3000 mm/min, 3000-4000 mm/min, 1000-2000 mm/min, 500-1000 mm/min, 0-500 mm/min |
Max Cutting Length | 500-1000 mm, 1000-2000 mm, 3000-4000 mm, 0-500 mm, 2000-3000 mm |
Max Cutting Width | 0-500 mm |
Specifications
Effective Cutting Size: 2,000 mm x 6,000 mm
Servo System Panasonic / Delta / Schneider
Reducer Precision Planetary Reducers, Shimpo Make (Japan)
Drive Dual Drive Rack Pinion on X and Y
Rack 1.5module 17x17 mm Precision Rack
Controller 10" LCD Controller, Fangling Make
Cutting Stations: 1 Plasma cutting station with Automatic Voltage Torch Height Controller
Oxyfuel Cutting Thickness Pierce: 50mm Edge cutting: 100mm
Plasma Cutting Thickness As Per Plasma Power Source specifications
The elevation stroke of cutting Torch 1-150mm
Nesting Software Most2D / Angelblade (Optional)
Positioning accuracy ± 0.25 mm/ meter
Rapid Speed 0-12000 mm / min
Cutting Speed 0-6000 mm / min (Depending on process, thickness)
Repeatability ± 0.5 mm/ meter
Shape accuracy ± 1 mm/ meter
Kerf compensation upto 15mm in 0.1 mm increments
Longitudinal Rail Y Axis T90 Rail
Linear Motion of X Axis LM Guideways - (Hiwin)
Cable Carrier (Drag Chain) Kabelschrepp - (Germany), Igus
CNC System Fangling F2300B
Cutting Mode Plasma, Oxyfuel
Working Environment Requirement
Working Temperature 0-40 °C
Relative Humidity 95% non-condensation
Periphery environment Airy, no impact within 5M
Power Voltage for CNC
Machine
230V Single Phase 50Hz +-2%
Online UPS (Double Conversion) 1.5 - 2 KVA
Input Power Single Phase for CNC System, Three Phase for Plasma
Power and Air Requirement
for Plasma As per Plasma Power Source
BASIC STRUCTURE:
Machine consists of a gantry simply supported on two end carriages and driven on both sides along the longitudinal axis. The welded and distortion free box structure provides rigidity to the machine. The machine is fabricated of high frequency induction welded square tube of TATA or equivalent make.
DRIVE MECHANISM: The motion along longitudinal axis is powered by dual Servo coupled with low backlash gearboxes. This arrangement provides smooth acceleration, deceleration and controlled profile cutting speeds. The motion along cross axis is powered by Serve motors couple with low backlash planetary gearbox mounted on the master station.
CNC CONTROLLER: Industrial grade ARM chip PLC controller
Make: Fangling
CNC Controller Features:
10” High Resolution Colour LCD Screen
Industrial grade ARM9 CPU
Electronic PCB keyboard with OMRON buttons.
64MB SDRAM, 256MB Flash for Program Storage
USB Interface for program transfer
Embedded software, No issue of computer viruses
Standard shape library
Break Point Resume from Power Failure
Corner speed control
Thick plate outside edge pierce and thin plate cross-bridge function Built in Kerf compensation function
1 Year Standard + 1 Year extendable warranty on CNC Controller.
WORK BED: The customer should fabricate the cutting bed for this machine. We will provide complete drawings and bill of materials for the cutting bed.
COLOUR: Default colour of the machine is Siemens grey and feroza blue. If any other colour is needed it needs to be mentioned while placing the order.
Service Charges: 1 year service included in the pricing.
NESTING SOFTWARE - Most2d
• Creation of components from macros
• Automatic nesting / Manual nesting
• Automatic setting of machine parameters
• Importation of DXF files
• Automatic / Manual grid nesting
• Automatic placement of lead-ins
• CNC programming
• Material optimization
• Cost control
Approx. Rs 35,000 / Unit(s) Get Latest Price
This is latest plasma cutting pug trolly with arrangement for height adjustor supplied along with 2 rails.Approx. Rs 40,000 Get Latest Price
Torch Type | Cutting torch, welding torch |
Fuel Gas Type | Plasma cutter, welding torch, etc |
Brand | kemppi, Panasonic,etc |
Model | YT-03PD2 | YT-03PE2 | YT-06PD2 | YT-06PE2 | YT-08PD2 | YT-08PE2 | YT-15PDW2 | YT-15PEW2 |
Type | Curved | Pencil | Curved | Pencil | Curved | Pencil | Curved | Pencil |
Torch Cooling | Air | Air | Air | Air | Air | Air | Water | Water |
Amperage Rating A | 35 | 35 | 60 | 60 | 80 | 80 | 150 | 150 |
Duty Cycle % | 40 | 40 | 100 | 100 | 100 | 100 | 100 | 100 |
Cable Length m | 10 | 10 | 1 | 10 | 10 | 10 | 10 | 10 |
Approx. Rs 2 Lakh / Unit(s) Get Latest Price
Specifications:Brand Available | Brief specification |
Hypertherm Powermax 125 | Recommended 38mm Maximum - 44mm Severance 57mm |
Hypertherm Powermax 30XP | Recommended 10mm Maximum - 12mm Severance 15mm |
Hypertherm Powermax 45 | Recommended - 12 mm Maximum - 19 mm Severance - 25 mm |
Hypertherm Powermax 65 | Recommended - 20mm Maximum - 25 mm Severance 32 mm |
Hypertherm Powermax 85 | Recommended - 25 mm Maximum - 32 mm Severance 38 mm |
Hypertherm Powermax 105 | Recommended - 32 mm Maximum - 38 mm Severance 50 mm |
Hypertherm MaxPro 200 | Recommended - 20 mm Production Pierce - 32 mm Severance 75 mm |